Arburg - ARBURG 520 E 1500-290 (2018)DE-INJ-ARB-2018-00004

2 Machines available

- Clamping Force / Injection Unit Size: 1500 kN / Injection unit size 290

- Operating Hours (Pump): 24,234 h (as of 05.11.2026)

- Operating Hours (Automatic): 20,965 h (as of 05.11.2026)

- Operating Hours (Semi-Automatic): 0 h

- Total Machine Cycles: 3,080,783

- Screw Diameter: 30 mm (Highly wear-resistant thermoplastic cylinder, CrN coated screw and non-return valve, mixing section)

- Non-Return Valve: Extended bushing and shortened stroke

- Drive / Hydraulic System: axw Control ScrewPilot via servoelectric direct drive, 15.5 kW small accumulator hydraulics with 11.2 l/min charging flow rate

- Control Unit: Selogica direct

- Clamping Platen Centring: Central Ø 125 mm, continuous groove in fixed platen (Y-axis: 6 mm deep, 22 mm wide + 0.02 mm), M12 Euromap mounting holes

- Core Pulls: 2 core pulls, simultaneous motion P/Q controlled, programmable; Core pull 2 extended to fixed platen; max flow rate 100 l/min

- Ejection System: Electromechanical ejector, synchronised with mould opening, ejector quick-release coupling, ejector plate safety connection

- Nozzle: Open nozzle 30 mm, tip with R 19 mm, programmable controlled nozzle contact force

- Mold Height Adjustment: Servoelectric mould height adjustment with automatic clamping force regulation

- Temperature Control / Heating: 12 electrical heating control circuits for mould heating (Harting HAN 24E special assignment); 1 additional heating control circuit for nozzle/adapter; mould temperature control interface 20 mA with connection cable for HB-THERM; temperature circuits up to max. 100 °C with flow measurement

- Pneumatics & Valves: Pneumatic service unit with 3 pressure reducers (3x 1000 l/min); blow-off unit 1 with 3/2 valve on fixed platen; electric and pneumatic actuation NVD1 in mould

- Interfaces: Robot system interface per EUROMAP 67 (50-pin) & EUROMAP 12 (F9264); safety gate door protection interface (EUROMAP 73); ALS (OPC-UA) ARBURG host computer interface; CF-card data storage; EUROMAP 65 chip card operator authorization; dosing / coloring unit interface; external conveyor belt control interface; container changer device interface; serial/USB printer interface; Mobile SELOGICA AMS connection

- Socket Distribution: Front operator side with 1 CEE, 1 Schuko; special distribution at rear end of machine base with 2x CEE 16A, 1x 32A, 3x Schuko 10A

- Lighting & Signaling: Waldmann MCXFL 3S LED machine light in mould installation space (automatic on/off with safety gate); acoustic and flashing light fault indicators

Including Peripheral Equipment:

- X-Axis (Horizontal Beam Traverse): Stroke: 2,500 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm

- Y-Axis (Demoulding Stroke): Stroke: 700 mm; Drive: Brushless servomotor; Linear instantaneous speed: 3.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm

- Z-Axis (Vertical Stroke): Stroke: 1,400 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm

- Motion Control: Digital linear control PTP (Display resolution 0.1 mm)

- Sound Pressure Level: 70 dBA

- Protection Rating: Cabinet IP22 / IK07; Portable terminal IP32 / IK06

Optional Components:

* Full safety fence perimeter enclosure with interlocked safety doors

* Parts drop chute (stainless steel hopper)

* Outfeed flat belt conveyor system

* Stacking / container handling table with tray alignment fixtures

* Integrated control pedestal and teach pendant